Services
CNC Turning Services
Precision turned and mill-turn parts — shafts, fittings, connectors and bushings with runout you can measure, batch after batch.
Round parts, held to microns
Our turning department handles everything from 1 mm connectors to 600 mm flanges, in short runs and repeat production. Mill-turn machines combine turning, milling and drilling in one cycle, so features that used to need two operations arrive from one setup — with far better concentricity.
Every turned part is gauged on the floor with calibrated micrometers and bore gauges, and critical dimensions are verified on CMM for first articles and audits.
- CNC turning with live tooling and mill-turn capability
- Concentricity and runout held to 0.005 mm on critical parts
- Threads, grooves, knurling and cross-holes in-cycle
- Bar-fed production for repeat orders with first-article sign-off
Specifications
Turning capabilities at a glance
| Parameter | Capability |
|---|---|
| Diameter range | 1 mm to 600 mm turned diameter |
| Length | Up to 1,000 mm between centers (longer by arrangement) |
| Materials | Aluminum, stainless, carbon & alloy steel, titanium, brass, copper, POM, PEEK |
| Tolerances | Shaft/bore fits and runout to 0.005 mm |
| Features in-cycle | Threading, milling flats, cross-drilling, slotting, knurling, parting |
| Typical lead time | 3–7 working days for turned parts; repeat orders scheduled per demand |
| Quality system | ISO 9001:2015, IATF 16949:2016, ISO 13485:2016, AS9100D |
Typical parts
Where our turned parts work
- Motor shafts
- Hydraulic fittings
- Sensor bodies
- Valve components
- Connectors & adapters
- Bushings & sleeves
- Spacers & pins
- Robotic actuator shafts
- Pump parts
- Instrument components