Services
CNC Bending Services
Press-brake bending for brackets, enclosures, frames and panels — accurate angles, consistent batches, tight boxes welcome.
Bends that close the box properly
Bending is where sheet metal parts succeed or fail: a bend allowance off by a few tenths and the enclosure no longer closes; a tooling choice wrong for the flange and the powder coat shows every mark. Our CNC press brakes run programmed bend sequences with angle measurement, so repeat batches hold ±0.5° and multi-bend parts come out in one handling sequence.
Design files can arrive as 3D (STEP) or flat DXF; we return a flat-pattern and bend-sequence review before cutting, so features that would tear or distort are caught on screen, not in the scrap bin.
- CNC press-brake bending up to 3,000 mm
- ±0.5° angle repeatability on production batches
- Tooling for tight boxes, long flanges and deep returns
- Flat-pattern and bend-sequence review before cutting
- Hardware insertion, welding and finishing in-house
Specifications
Bending capabilities at a glance
| Parameter | Capability |
|---|---|
| Bending length | Up to 3,000 mm on CNC press brakes |
| Thickness | 0.5–6 mm typical (material dependent) |
| Angle accuracy | ±0.5° repeatable on production batches |
| Materials | Cold-rolled steel, galvanized, stainless 304/316, aluminum 5052/6061, copper |
| Finishes | Powder coating (RAL), painting, brushing, galvanizing |
| Assembly | Hardware, rivet nuts, studs and sub-assembly on request |
| Quality system | ISO 9001:2015 — first-article and batch verification |
Typical parts
What comes off the brake
- Control panel enclosures
- Equipment chassis
- Mounting brackets
- Machine guards
- Electronics housings
- Battery pack frames
- Ventilation panels
- Custom rack systems